1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
3.REMOVE UPPER INSTRUMENT PANEL
86101
4.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
w/ Navigation System or w/ Digital Audio Broadcasting:
Detach the 6 clamps and remove the antenna cord sub-assembly.
| *A | w/ Navigation System | *B | w/ Digital Audio Broadcasting |
w/o Navigation System:
Detach the 4 clamps and remove the antenna cord sub-assembly.
Disconnect each connector.
Detach the claw.
86101
5.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
Detach the 4 clamps and remove the antenna cord sub-assembly.
| *A | w/ Navigation System: | *B | w/o Navigation System: |
Disconnect each connector.
Detach the claw.